●固色剂 Fixer NLF
使用量2-3%，增加牢度，改善胶浆表面粘度，加入后当天使用。
Recommended dosage is 2-3%.It can increase wash fastness and decrease viscosity of the prints.Use in 8h.
●尼龙助剂 Nylon Assistant NS-2
使用量2-3%，增加牢度，改善胶浆表面粘度，加入后当天使用。
Recommended dosage is 2-3%.It can increase wash fastness and decrease viscosity of the prints.Use in 8h.
●催化剂 Activator NS-1
特别适合于PU胶浆，使用量0.5-1%，添加后能迅速提高浆料的牢固度，且能改善胶浆表面的粘度。
Recommended dosage is 0.5-1.0%.It can increase wash fastness and decrease viscosity of the prints effectively.
Use in 4-6h.
●催化剂 Activator NS-3
高牢度、高耐洗助剂，使用量2-4%。
Recommended dosage is 2.0-4.0%.It can increase wash fastness.Use in 4-6h.Must keep from water.
●催化剂 Activator NS-6
加入后长效不变质;需高温固化交联，使用量1.0%。
Recommended dosage is 1.0%,long-term effective.
●环保拔染粉NA-３
环保无甲醛，使用量５%。
Free of formaldehyde ,recommended dosage is 5%.
●不含APEO乳化剂 Emulsifying Agent(Free APEO)
●防塞剂 Antiblocking Agent
●各种增稠剂 Thickening Agent
●稳定剂 Stabilizer Agent
●分散剂 Dispersant
●柔软剂 Softening Agent
●渗透剂 Penetrant
●防粘剂 Adhesion Preventives
●各种粘合剂 Acrylic/PU Resin
